Please use this identifier to cite or link to this item: http://www.ptolomeo.unam.mx:8080/xmlui/handle/132.248.52.100/14941
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRivera Mendoza, Orlando R.-
dc.date.accessioned2018-03-22T00:05:54Z-
dc.date.available2018-03-22T00:05:54Z-
dc.date.issued2007-06-
dc.identifier.urihttp://132.248.52.100:8080/xmlui/handle/132.248.52.100/14941-
dc.description.abstractUG-125 All pressure vessels within the Scope of this Division, irrespective of size of pressure, shall be provided whit pressure relief devices in accordance with the requirements of UG-125 trough UG-137. It is the responsibility of the user to ensure that the required pressure relief devices are property installed prior to initial operation. These pressure relief devices need not be supplied by the vessel Manufacturer. Unless otherwise defined in this Division, the definitions relating to pressure relief devices in Section 2 of ASME PTC 25 shall apply.es_ES
dc.description.sponsorshipDECDFIes_ES
dc.language.isoenes_ES
dc.subjectRecipientes a presiónes_ES
dc.subjectPressure relief devices, valves, nonreclosing, liquid pressure relief valves, marking, certification of capacity of pressure relief devices, pressure setting, installation, minimun requirements for pressure relief valves, minimun requirements for rupture disk devices, capacity conversions safety valves, determination of certified relieving capacitieses_ES
dc.titleDiplomado de Recipientes a Presión: Módulo IV (Dispositivos de Alivio a Presión Conforme a la Sección VIII, Div. 1 del Código ASME)es_ES
dc.typeApunteses_ES
dc.director.trabajoescritoRivera Mendoza, Orlando R.-
dc.carrera.ingenieriaIngeniería mecánicaes_ES
Appears in Collections:Colección Mecánica, Mecatrónica y Automotriz

Files in This Item:
File Description SizeFormat 
decd_5082.pdf1.19 MBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.